Drawing / Heating

DMW 12/200 Draw Winding Machines

Draw Winding Machines for the refining of PES, PA, PP and other suitable materials. Titerrange from 20 dtex to  1000 dtex for superior final products.


Drawing Stands / Drawing Lines

Drawing Stands for Multi- and Monofilaments. Temperatures up to 260 °C / 500 °F. Yarn Speeds up to 4.000 m/min. Drawing Lines for the finishing of Foils, Tapes and Fibers using heated or cooled rollers. Temperatures up to 400 °C / 750 °F. Working widths up to 400 mm.


Tunnels for Heating and Drawing

For heating of drawing, shrinkage or fixation processes. Temperatures from 80 °C / 180 °F up to 2.000 °C / 3.600 °F. With inert gas atmosphere, if needed


Hot Rolls and Draw Stands

For the finishing of foils, tapes and fibers. Working widths from 60 mm to 400 mm. Diameters from 80 mm to 400 mm. Temperatures from 80 °C /  up to 260 °C.


Draw Stands for Plates / Hot Plates

For heating in drawing, shrinkage or fixation processes. Temperatures from 60 °C / 100 °F to 300 °C / 570 °F. With maximum deviation of 1 ° C over the entire surface. Heating power up to 20 kW/m². With adjustable curvature of the hot plate.


Erdmann Enterprises Deutschland GmbH
Rehhecke 89, D-40885 Ratingen-Lintorf, Germany
Fon: +49-(0)-2102-10059-0
Fax: +49-(0)-2102-10059-29

Plants, equipment and devices of heat treatment processes
for the refinement of Flat Glass, Synthetic Fibres, Tapes, Foils and Plates.


This site uses cookies. By using this website, you agree to cookies being set. Privacy